UK1541

Technical Info
Hardware features	2 Buttons - Menu and Reset 4 LEDs - Drive, Motor, Debug, System SD card slot IEC bus connector DB9 connector IR receiver
CRT ID	None

The cartridge described in this article is under constant active development - for recent news and data please check: Facebook

UK1541 aka Ultimate Killer is a floppy drive emulator developed by Krzysztof Switajski aka Kisiel/ICON. Unlike the 1541 Ultimate or the Chameleon, this device is microcontroller based and does not use a FPGA - which makes it relatively cheap.

Features

UK1541

UK1541

UK1541 Expander

UK1541 Expander (WIP)

UK1541 LEDs

UK1541 LEDs

UK1541 UI

UK1541 User Interface

UK1541 Remote

UK1541 Remote

• Full (cycle exact) emulation of the commodore VC1541 floppy drive
  • 6502 core running at 1Mhz with illegal opcodes
  • 16kB Flash ROM
  • 4KB RAM, from $0000 to $0fff
  • VIA port and timers emulation
• supports 35/40 track d64-files (read and write)
• SD card (FAT32)
• Firmware updates from SD card

Hardware Specifications

• Board dimensions: 88x70x2mm
• LCD TFT Screen 2,2“ , 320 x 240, True Color
• MSP430
• LCP1114, Cortex M0, 48Mhz (0,84 DMIPS/Mhz)
• SD card slot
• IR receiver (for remote control)
• CR2032 battery holder (currently not used)
• mini jack connector as replacement for IEC port
• DB9 connector (for joystick)
• User Port connector
• two buttons
• four LEDs

Known Problems

• unable to test with the VICE drive tests, as those will (for the most part) not work at all
• Currently the device will crash when a CR2032 battery is inserted
• Device may freeze/hang randomly after a power cycle
• Firmware can not be downgraded
• very small, almost unreadable, font used for the file selector on the LCD
• The firmware updates are not packaged in a way that would make it possible to see what version a firmware update is

Documentation

Unfortunately, no documentation exists other than what is on the project page (and is duplicated here).

Buttons

• MENU (left) - reset user interface and SD card
• RESET (right) - reset emulated drive

LEDs

• DRIVE (red) - functions as is in 1541 real drive
• MOTOR (blue/green) - indicates if motor is on/off
• DEBUG (yellow) - at this stage indicates SEI/CLI flag of CPU
• SYSTEM (red) indicates errors connected to IR, battery

User Interface

The user interface is split to four main windows:

• Top bar, highlights currently selected file to mount/unmount
• Left Window, shows file list with cursor
• Right Window, shows directory content of d64.
• Bottom bar, shows current status, type of d64, current Track number, etc.

Navigation

To navigate the cursor you need to use either a joystick plugged into the DB9 port or the IR remote control

joystick / remote function:

• up / down - cursor moves up and down,
• left/right - cursor moves to previous/next page
• Fire - to mount/unmont disc, to enter directory

Other buttons on IR remote controller:

• GUI Reset - resets SD and TFT screen, GUI. (same as left button at cartridge)
• Core Reset - resets 6502 core , VIA's etc. (same as right button at cartridge)
• Drive 8 - drive number 8, switch set to number 8 (core reset required)
• Drive 9 - drive number 9, switch set to number 9 (core reset required)

Firmware

The most recent firmware update files can be found here. Updates are announced in a Forum thread, which unfortunately is also the only existing "change log". No older versions of the firmware are provided here, because the device does not allow to downgrade anyway.

Updating

1. Turn off C64
2. Prepare empty SD card, FAT32 formatted
3. Copy firmware update files to the Root of the SD card
4. Plug SD card into the UK1541
5. Turn on C64
6. Firmware will get updated, wait until UI shows windows
7. Remove files from SD card after update

Notes

• Review on IndieRetroNews

Weblinks

• Facebook Page
• Project Website
• Firmware update thread on C64Power
• UK1541 Forum on C64Power (polish)
• Feedback thread on C64Power
• Feedback thread on Amibay
• Feedback thread on Forum64 (german)
• UK1541 Case by COREi64